Please Fill Up Your Company Details And Your Designation

Update Your Profile
 
Your email ID :  
     
Password :  
     
          
New user? Create an account               Forgot password?
     
 

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Industrial Products India, Industrial Manufacturers & Suppliers
 




 
   
 


Product Image :
Category :
Sub Category : Hand tools & Power tools
Product Name : Automatic Duplex Debarring & Chamfering Tools
Product Details : Chamfers drilled holes both from front and back in one go; Chamfering, immediately
after drilling, with no changes either in job setting, spindle speeds or direction of
spindle rotation. No special skill is required.; Produces uniform changer; Fully automatic
– no manual interruption required even while back chamfering or retraction; Both front
and back chamfering done in about 10 seconds; Easily adjustable blade projection
permits increase and decrease in the chamfering width; Long lasting, regrind able &
interchangeable HSS blade; Available for whole dia 4 mm onwards
Features: The tool consists of only 4 parts - shank, HSS blade, fulcrum-cum-lock
screw and screw for adjusting blade projection. Both these screws are easily
adjustable with a standard Allen key. Tool shank is made of alloy steel and heattreated
for wear-resistance. The holding end of the tool shank is cylindrical and gets
mounted on the machine spindle through collets or drill chuck. The other end of the
shank has a slot, which accommodates the blade.
The blade, having certain unique features, is made of high cobalt HSS and it
undergoes a special heat treatment process, because of which it attains certain level
of spring action. After cutting on the top of a hole, the blade slowly retracts inside the pocket,
provided in the tool shank, as the cutting pressure increases.
The blade gets slowly released from the pocket, as the cutting pressure decreases and the
debarring and chamfering operations are done in the bottom of the hole. The cutting edges of
the blade have a very long life. Depending upon the hardness of the job, cutting parameters and
the other factors, the blade lasts thousands of jobs, before it gets ready for regrinding.
The blade can be fixed, removed and adjusted to achieve the right projection easily in no time
through an Allen key, even when the tool is mounted on the machine spindle. Spare blades are
always generally available which are replaceable. The standard blade has 45º angles and it has
two cutting edges for performing duplex chamfering operation. Different angle and/or single
cutting edge can be provided on request.
Communication Address : SHENOY ENGINEERING PVT. LTD
# 7, 19th Cross, Doddanna Indl Estate, Bangalore 560091 Ph: 080-28361767; Fax: 080-28361725, e-mail: enquiry@spm-india.com
   



 
 
   
      More...
 
 
 
     
 
 
     


 
 
FORUM  
Are Indian Brands
Globally competitive
    
   
 
 
 
 
     
  Continue to blog  
More >>